Archives for November 8, 2018

Creative Reuse – Slab End Table

Creative Reuse – Slab End Table

Slab End Table Project Gives New Life to an Old Stump

America Recycles Day is November 15th. We, at Butcher Block Co., like to raise awareness and remind our readers that you can honor the spirit of this day, every day, just at home. Be mindful of what you use and what you waste. Strive to Reduce, Reuse, Recycle and Repurpose. It is fitting that early November is always bulk trash week in our neighborhood, so we keep an eye out for any “treasures” we can reuse. This week’s blog highlights one of the treasures we found in bulk trash earlier this year – a huge mesquite wood stump about 20″ high and 23″  wide. This stump will be reused for many projects. We start with this Slab End Table.

The goal of creative reuse, also called upcycling, is to find a purpose for items or materials that have been discarded. Many times tossed items can have an extended, useful life. The trick, or talent, is discovering and seizing this opportunity. Upcycling ultimately should, and can, have the overall environmental benefit of reducing your carbon footprint.

SLAB END TABLE – We love the unique asymmetrical shape of the stump combined with the variation in grain pattern and color.

HOW TO:

  • We decided the large stump could be made into multiple projects so we had it cut into ten – 2″ thick slabs.
  • We then ran them threw a large planer to make the top and bottom of each slab even and smooth.
  • All the loose bark was peeled off of the edges, exposing the cream colored edge of the mesquite wood.
  • All sides were then sanded smooth.
  • We applied multiple coats of WATCO Danish Oil Finish to penetrate the grain and highlight the color and grain pattern.
  • The last step of finishing was to apply multiple coats of General Finishes Arm-R-Seal Semi-Gloss Urethane.

BEFORE & AFTER

This is a sister slab (after planing) before any prep work was done versus the finished Slab End Table in our living room.

We completed the table by attaching three 23″ black hairpin legs, from DIY Hairpin Legs, making this Slab End Table the perfect height for our sofa.

Total material cost of the project – approximately $50

SLAB NIGHTSTAND – We completed a similar project from a much smaller mesquite tree stump.

Share with us your creative reuse projects. We would love to hear from you!