A few years ago, when I started working for ButcherBlockCo., I had the privilege of touring the John Boos & Co. butcher block manufacturing facility in Effingham, Illinois. Seeing the process of how butcher block is made from start to finish was enlightening. It felt a lot like making furniture by hand in a workshop, but on a much larger scale.
The process seems to be a wonderful balance of technology and science with craftsmanship and artistry, all working together to make these beautiful pieces of butcher block furniture come to life.
Here is my summary of How Butcher Block Is Made:
Before the wood ever arrives at the manufacturing plant, individual trees are selected for harvest, encouraging forests to renew and regenerate themselves naturally. At the lumber mill, trees are cut into lumber for purchase and distribution. John Boos only buys wood from suppliers who are members of the National Hardwood Lumber Association, guaranteeing they practice responsible reforestation.
When lumber arrives at the John Boos facility it is staged in their lumber yard. Lumber is sorted, piece by piece, to gauge its grade using a “grader’s stick” to approve each board for processing. After lumber is inspected and graded it “rests” in an outdoor staging area for a few weeks as part of the first steps in the drying process. Step two of the drying process is to transfer the lumber to gigantic, wood-fired kilns where it is dried for 18 to 28 days. The enormous kilns used to dry the lumber are heated by a boiler, which is fueled by sawdust and wood scraps generated during the process of making butcher block. After nearly a month of drying in the kiln, the cured lumber enters the start of the production process.
All the lumber coming into the manufacturing plant is first planed and sanded to get a very flat and smooth work surface. Then it is immediately run through a glue line rip saw cutting the wood into 1.75 inch rails. Each wood rail is inspected and marked for defects using fluorescent markers, which are read by a computer to eliminate defective sections. Final rails are then sorted by grade, separating the premium rails to be used for kitchen countertops and high quality butcher block surfaces from the lower grade rails to be used for industrial countertops.
To make blended-grain butcher blocks, rails of varying length are finger jointed together, then laminated and glued side by side, hiding all finger joints. To make edge-grain butcher blocks, rails of the same length are laminated and glued together side by side, forming what then looks like a solid piece of butcher block wood. End-grain butcher block is characterized by its checkerboard appearance. This block starts with laminated edge-grain boards, that are glued and stacked on top of each other, then placed in a gigantic vice called a screw press, squeezing the wood and glue together. After drying, the block is set on end and the “ends” of the rails become the butcher block cutting surface, hence the term “end-grain.”
All butcher block, be it blended, edge or end-grain, is then sanded down with 200 grit to provide a silky smooth cutting surface. It is then made into Boos Blocks
, cutting boards
, butcher block table
tops, standard and custom countertops
, etc. Finally, all butcher block is finished with a treatment of food-safe mineral oil or board cream before it is allowed to leave the plant. It is packaged with care and shipped to consumers, restaurants and retailers all across the US.
Having seen how butcher block is made makes me appreciate all of the effort that has gone into what appears to be a relatively simple piece of wood. I know I take great pride in displaying and using my John Boos butcher block every day!