About this product
- 24"H; widths (depths) of 24, 30 and 36"
- Lengths of 15, 18, 24, 36, 48, 60 and 72"
- Top is 16-gauge type 300 stainless steel with #4 polish satin finish
- Reinforced by a full frame fabricated of 1-1/2" square O.D. tube 16-gauge pre-galvanized steel
- 1-1/2" turn-up riser on rear & both sides
- 7/8" radius on front edge
- Adjustable-height bracing is 1-1/4" round O.D. 18-gauge tubular stainless steel
- Legs are 1-5/8" round O.D. 16-gauge tubular stainless steel
- Stainless steel gussets
- 1" adjustable stainless steel bullet feet
All Boos Commercial Work Table Tops Are Stainless Steel
The stainless steel tops on these commercial tables come in gauges of 14, 16 and 18. Keep in mind that as gauge decreases the thickness of the steel actually increases, as do table weight and price. So you have a range of options, depending on your intended use and your budget. Another choice you must make is whether you want a flat table top or one with a rear riser. Of course, risers come in handy by helping keep whatever it is you’re working with on the work surface and off the floor. An important feature worthy of mention is that all Boos steel work tops are sound-deadened. In other words, they’re engineered to minimize noise by converting vibrational energy into heat that is then dissipated into the air.
Select Either Galvanized or Stainless Steel for Your Table’s Base & Shelves
“Base” refers to the table’s legs and bracing (the steel cross bars that connect the legs of the table, adding structural rigidity). You have the option of selecting either galvanized or stainless steel for these components. Here’s a quick primer to help you decide. Galvanized steel is protected by a thin surface layer of zinc. Over time, the zinc coating will wear away, so scratches in galvanized steel can lead to localized rust. In contrast, stainless steel is protected by chromium dispersed throughout the steel, not just on its surface. So stainless steel will not rust, regardless of how deeply it’s scratched. As you might know or can imagine, stainless steel is more expensive than is galvanized steel.
NSF-Certification Means These Work Tables Are Approved for Use Throughout the Food Service Industry
The NSF seal signifies that through product testing, material analysis and plant inspections, these stainless steel-top tables have been certified to be in compliance with industry standards and are therefore approved for use in locations where sanitary standards are especially high, such as in restaurants, delis, bakeries and food processing facilities.
Boos Keeps Worker Safety Top-of-Mind in Designing All Its Products
That’s why they devised what they call the Stallion Safety Edge. Essentially Boos engineers eliminated sharp edges at dangerous angles that could otherwise cause injuries when workers reach under a table to retrieve or store materials. Instead, the worker’s arm will contact a flat surface that’s contoured downward at a 45-degree angle.
|Sale Price||Model #||Lower Shelf||Length (in.)||Width (in.)||Height (in.)||Weight (lbs.)||Ships||UPC|
John Boos & Co. backs up its products with a one-year warranty against defects in material and workmanship.
At their election, Boos will either repair or replace a product determined to be defective. This warranty does not apply to damage resulting from normal wear and tear, accidents, abuse, neglect, misuse, alterations* or exposure to extreme conditions. Nor does it pertain to wood products ordered unfinished.
*With respect to Boos wood countertops: Cutting into a countertop (e.g., trimming its length or width or executing miter cuts or cutouts) will void the manufacturer's warranty. Should you desire a custom size, a miter cut or a cutout, consider calling for pricing on factory-warranted custom cuts.
Neither Boos nor Butcher Block Co. will be liable for any loss or damage arising from use of products or for any consequential damages.
30-Day Return & Exchange Policy
If you are unhappy with your purchase for any reason, you may return or exchange it within 30 days of the date of purchase. Since all John Boos products are made-to-order,a 20% restocking fee will apply and you will be responsible for return shipping costs. Please note that customized merchandise (e.g., custom countertops) cannot be returned or exchanged (unless the goods arrive in damaged condition, of course).
If you find the identical, brand new product for less (including shipping & handling) on another website within 3 days of your purchase, email us the address of the webpage where you found the lower-price offer. If we determine that the online store is an authorized John Boos dealer, we will refund the difference. Please note that Butcher Block Co. will not always be able to match a lower price offer (e.g., in cases where doing so would violate legal agreements between us and our manufacturer-partners) and any refund may be limited (e.g., in cases where the competing offer is below our all-in cost).
Boos Commercial Products Are Specially Designed for the Food Service Industry
||Tables & Cabinets